Wednesday, May 18, 2011

Toyota Caldina GT4 (ST246) Turbo Downpipe/ Dump Pipe

Below are some photos of the SUPERCIRCUIT Downpipe/ Dump Pipe made for the Toyota Caldina 2.0 GT4 (ST246). This is a de-cated stainless steel downpipe with CNC machined stainless steel flanges and is fully TIG/Argon welded and every production steps have been taken care of, so the fitting and finishing is just as perfect as it can get.


Please refer to the above illustration, just in case some of you don't know where the downpipe/ dump pipe located at the engine bay of your Toyota Caldina GT4 (ST246)....


This is how the factor stock downpipe/ dump pipe of the Toyota Caldina GT4 (ST246) it looks like from underneath (ABOVE PICTURE).


The outlet of the factory stock standard turbo after the downpipe is removed (ABOVE PICTURE).


Toyota Caldina GT4 (ST246) factory stock downpipe vs. the SUPERCIRCUIT de-cated downpipe.


For those who would like to go a step further to replace the stock turbo manifold of the Toyota Caldina GT4, SuperCircuit also provide the service to replace the turbo manifold professionally. Check it out here.

For more information, please visit us at SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please 'LIKE' and follow SuperCircuit Exhaust Facebook for more exhaust news and updates.

12 comments:

  1. what size is the downpipe 2.5 - 3 inch?

    ReplyDelete
  2. Yakamo, the size of the downpipe is 2.5". Thanks.

    ReplyDelete
  3. Hi thanks for that,

    is there an option for 3" inches since bigger is normally better for turbo cars?

    thanks

    ReplyDelete
  4. Yes, Yakamo. We can specially custom made a 3" downpipe for you. Please proceed to SuperCircuit Exhaust Pro Shop for more information. Thanks. - Frank.

    ReplyDelete
  5. so this is just a straight old one out new one in?

    ReplyDelete
  6. The downpipe is straight bolt-on, no modification required.

    ReplyDelete
  7. Do you by any chance ship over to Australia?

    ReplyDelete
  8. Will this downpipe bolt up to the st215 caldina turbo as well? I have an st215 in my mr2 and need a downpipe . Can these be had with the 3bolt flange to mate up to an mr2 catback exhaust? If not I would still purchase the one as shown with the two bolt flange. I just need one ASAP!!

    PLEASE email me at bbgto79@gmail.com

    ReplyDelete
  9. Hi Matthew,

    Thank you for the inquiry.

    We are not sure if the ST246 downpipe will fit ST215 turbo or not. Please contact us at the SUPERCIRCUIT EXHAUST facebook or via www.h-perforamance.com.my.

    Thank you.

    ReplyDelete
    Replies
    1. hi! can you give me your email? i just wanna order it. :P

      Delete
    2. hi! can you give me your email? i just wanna contact you and order it. cheers!

      Delete
    3. Hi Robin, please send us your inquiry to SuperCircuit Exhaust Facebook. Your questions will be answered there. Thanks.

      Delete