Saturday, December 28, 2019

Subaru XV UEL Headers

For a clearer and unique Subaru boxer engine rumble from your 1st gen. Subaru XV (a.k.a. Subaru XV1), as well as higher torque and horsepower over the factory stock original, may we present you the SUPERCIRCUIT UEL Header!  


The SUPERCIRCUIT UEL Exhaust Header is fabricated with grade 304 mandrel bent stainless steel pipes and is fully TIG/Argon welded on CNC machined stainless steel flanges for direct bolt-on application to the 1st gen. Subaru XV/ Crosstrek.



The unequal length header, as the name describes, has the two primary pipes from one side of the boxer engine, traveled at different distances to the collector as compared to the other two primary pipes from another side of the engine; causing the exhaust to create the iconic Subaru rumble! 





Match the SUPERCIRCIT UEL Headers with a straight flow rear muffler as shown in the picture above to get an optimum effect of the iconic boxer engine exhaust note from your 1st gen. Subaru XV/ Crosstrek:



The above SUPERCIRCUIT UEL Headers made for the Subaru XV1 not only bringing you the rumbling boxer engine note, it also promotes better exhaust flow efficiency due to it is catless, hence gaining more horsepower and torque too!

To purchase or for more information about the above SUPERCIRCUIT direct bolt-on UEL Exhaust Header made for the Subaru XV1, please visit us at SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please 'LIKE' us on the SuperCircuit Exhaust Facebook for more exhaust news and updates.

Friday, December 20, 2019

Toyota 86 Cat Pipe

One of the ways to improve the exhaust flow efficiency and gain more performance is to replace or remove the factory stock catalytic converters on the Toyota 86. Originally, there are two catalytic converters, one on the exhaust header and the other one is on the 'cat pipe' shown in this article.


The factory stock original cat pipe of the Toyota 86 is designed in a way that one can remove it easily, for track or race purpose, by simply unscrew four bolts and replace it with a catless one.

The SUPERCIRCIT Cat Pipe is made of grade 304 mandrel bent stainless steel and is fully TIG/Argon welded on CNC machined stainless steel flanges, designed for direct swap.


The SUPERCIRCUIT Cat Pipe is designed for direct bolt-on application, no weld or cut is required during the installation process. The Toyota 86 factory stock cat pipe can be swapped back in position anytime and back to original.




To purchase or for more information about the above SUPERCIRCUIT direct swap Cat Delete Pipe made for the Toyota 86/ Subaru BRZ, please visit us at SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please 'LIKE' us on the SuperCircuit Exhaust Facebook for more exhaust news and updates.

Wednesday, December 18, 2019

Toyota Hilux REVO 2.8D Downpipe

SUPERCIRCUIT has the downpipe developed for the Toyota Hilux REVO 2.8D (1GD-FTV), to improve exhaust flow efficiency, promote better turbo spooling and better low-end torque and horsepower.


The original downpipe is at the left side of the Toyota Hilux REVO 1GD-FTV 2.8D engine as indicated in the picture below.


The factory stock original downpipe can be removed from the Toyota Hilux REVO 2.8D engine fairly easily as it is connected to the turbo outlet with an exhaust clamp and two bolts to the rest of the cat-back exhaust system as shown in the picture below.


The SUPERCIRCUIT Downpipe is made of grade 304 mandrel bent stainless steel pipes and is fully TIG/Argon welded on CNC machined stainless steel flanges, which promotes better exhaust flow and faster turbo spooling, hence better low-end torque and lesser turbo lag.


The SUPERCIRCUIT Downpipe is designed for direct bolt-on application. At the front, it is connected to the turbo outlet via the original exhaust clamp, and at the rear it is bolted onto the Toyota Hilux REVO 2.8D factory stock original cat-back exhaust system with the original spring bolts.



At the other end of the SUPERCIRCUIT Downpipe, it is secured to the rest of the Toyota Hilux REVO 2.8D's cat-back exhaust system via two spring bolts as shown in the picture below. Just straight bolt-on, no cut or weld is required during the installation.



For more information for the above custom made valvetronic catback exhaust, please visit us at SuperCircuit exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: +6 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please 'LIKE' and follow us on SuperCircuit Exhaust Facebook for more exhaust news and updates.

Monday, December 16, 2019

Honda Civic FC 1.5 VTEC Turbo Cat-back Exhaust System Customization

Here is yet another custom made cat-back exhaust system for the 10th gen. Honda Civic FC 1.5 VTEC Turbo by SuperCircuit Exhaust Pro Shop.


This custom made Honda Civic FC 1.5T cat-back exhaust system is fully TIG/Argon hand welded with grade 304 mandrel bent stainless steel pipes and matched with a mid resonator and two s-flow muffler for low and bassy exhaust note.


The whole Honda Civic FC 1.5T factory stock exhaust system is brought down for the SuperCircuit custom made one.


The custom made exhaust system is fully crafted from scratch with a mid resonator and two rear mufflers, then hand TIG/Argon welded by the craftsmen here at the SuperCircuit Exhaust Pro Shop.


This custom made exhaust system is fully crafted from scratch with a mid resonator and two rear mufflers, then hand TIG/Argon welded by the craftsmen here at the SuperCircuit Exhaust Pro Shop with top notched craftsmanship and built quality, for long lasting performance and durability!

For more information for the above custom made valvetronic catback exhaust, please visit us at SuperCircuit exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: +6 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please 'LIKE' and follow us on SuperCircuit Exhaust Facebook for more exhaust news and updates.

Thursday, December 12, 2019

Mercedes Benz C300 (W205) Cat-back Exhaust Custom

When it comes to custom made exhaust system, SUPERCIRCUIT Exhaust Pro Shop is definitely one of the top choices if you are at this part of the Peninsular.

Featured below is yet another Mercedes Benz C-class (W205) custom made cat-back exhaust system, hand built by the master craftsmen here at the SUPERCIRCUIT Exhaust Pro Shop.


The below cat-back exhaust system is custom hand built with grade 304 mandrel bent stainless steel pipes and is fully TIG/Argon welded for excellent durability and sporty exhaust note to the customer's liking and preference.


It is setup with a mid resonator and dual s-flow rear muffler to low and bassy exhaust note, then put together by TIG/Argon welding carefully by the master craftsmen here at our factory.




For more information about the exhaust customization, please visit us at SuperCircuit exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: +6 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please 'LIKE' and follow us on SuperCircuit Exhaust Facebook for more exhaust news and updates.

Monday, December 9, 2019

Toyota 86 Cat-back Exhaust Custom

Here at SUPERCIRCUIT Exhaust Pro Shop, we provide exhaust customization service with high craftsmanship and top quality materials. So, look no further if you are searching for top-notch exhaust customization service for your car.

Featured below is yet another Toyota 86 with the custom SUPERCIRCUIT cat-back exhaust system.

This is the Toyota 86 factory stock original exhaust system.


The custom made cat-back exhaust system is made with grade 304 mandrel bent stainless steel pipes and is fully TIG/Argon welded by the master craftsmen here at the SuperCircuit Exhaust Pro Shop, matched with a mid resonator and dual s-flow rear mufflers, the exhaust sound is simply sporty and awesome!!



This custom made cat-back exhaust system replaces the factory stock original one and it is a direct swap. No cut or weld is required during the installation. The original Toyota 86 exhaust system can be swapped back in place whenever required.


This is an one-off exhaust customization job made according to the customer's requirements in exhaust sound level, size of exhaust tips etc. The car has to be at our factory for such kind of exhaust custom mod.

Please visit us at SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: +6 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please 'LIKE' and follow us on the SuperCircuit Exhaust Facebook for more exhaust news and updates.

Friday, December 6, 2019

Perodua Myvi Gen3 Tuned-length High Performance Extractor

This is the ULTIMATE extractor developed for the 3rd generation Perodua Myvi (Gen3)!



The SUPERCIRCUIT tuned-length high performance exhaust headers made for the 3rd generation Perodua Myvi has possibly the highest output among all the aftermarket extractor brands available in the market!!






The SUPERCIRCUIT Tuned-length high performance 4-2-1 Exhaust Headers/ Extractor is  designed for direct bolt-on to the 3rd generation Perodua Myvi (Gen3) for optimum horsepower and torque gains!



Pay us a visit at the SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate and tell us how you would like to mod your exhaust system or call us for more information at +6 03 5632 2855 or Send Us A Message using the form on the right of this page.



Please 'LIKE' and follow us on our SuperCircuit Exhaust Facebook Page for more exhaust news and updates.

Wednesday, December 4, 2019

Perodua Myvi Lagi Best MT 4-2-1 Extractor

We have supplied yet another Perodua Myvi Lagi Best MT with the SUPERCIRCUIT 4-2-1 Extractor, for better low-end torque and high-end horsepower. 


The SUPERCIRCUIT 4-2-1 Extractor is made with grade 304 mandrel bent stainless steel pipes and is fully TIG/Argon welded on CNC machined stainless steel flanges for direct bolt-on application and long lasting performance.




The SUPERCIRCUIT 4-2-1 Extractor is designed for direct bolt-on application. At the top, it is mounted to the exhaust outlet ports of the Perodua Myvi 1.3L/ 1.5L (3K-VE/ 3SZ-VE engine) as shown in the picture below.


At the other end of the extractor, it is secured to the rest of the cat-back exhaust system via the original spring bolts as shown in the picture below.


The SUPERCIRCUIT 4-2-1 extractor is specially developed for the Perodua Myvi 1.3L/1.5L MT. It is tested and dyno proven to significantly improve horsepower and toque over a wide range of RPM for the 2nd generation Perodua Myvi Manual Transmission ONLY! (For the Auto Transmission Perodua Myvi Gen2, we have the 4-1 extractor specially made for it here).

To purchase or for more information about the above SUPERCIRCUIT 4-2-1 Extractor made for the second generation Perodua Myvi 1.3L/ 1.5L MT, please visit us at SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please 'LIKE' and follow us on our SuperCircuit Exhaust Facebook Page for more exhaust news and updates.

Monday, December 2, 2019

Ford Fiesta 1.6 Cat-back Exhaust Custom

The sixth generation Ford Fiesta VI (Mark VII in the UK) with the custom made cat-back exhaust system by SuperCircuit Exhaust Pro Shop.




Look no further if you are searching for top-notch exhaust customization service for your car. Here at SUPERCIRCUIT Exhaust Pro Shop, we provide exhaust customization service with high craftsmanship and top quality materials.


Shown in the above picture, the Mk 7 Ford Fiesta 1.6 factory stock original cat-back exhaust system and the SUPERCIRCUIT custom made one. The custom made exhaust system is specially hand crafted for excellent exhaust flow efficiency and sporty exhaust note, which is made with grade 304 mandrel bent pipes and fully TIG/Argon welded for optimum durability and performance.



The above is an one-off exhaust customization job made according to the customer's requirements. The car has to be at our factory for such kind of exhaust custom mod.

Please visit us at SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: +6 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please 'LIKE' and follow us on the SuperCircuit Exhaust Facebook for more exhaust news and updates.