SuperCircuit Twin Exhaust Custom for Suzuki Swift 1.5 Hikari Bodykit

SuperCircuit custom made twin exhaust system for Suzuki Swift 1.5 with Hikari bodykit. The two rear chrome ornament plastic caps were removed and cut out for two rear exhaust outlets!

This axle back exhaust system is custom made with grade 304 stainless steel mandrel bent piping, TIG-Argon welded with SuperCircuit craftsmanship.

Two stainless steel straight flow mufflers are used for this axle back system. The rest of the exhaust system is still factory stock.

The exhaust sounds like:

All of the above are customized at SuperCircuit Exhaust Pro Shop. For more information, please contact us at tel: 03 5632 2855 or join our SuperCircuit Exhaust Facebook for more exhaust news and updates. 

Audi A5 Coupe Full Exhaust Customization

Please check out the full Audi A5 Coupé (8T3) 2.0T exhaust system customization by SuperCircuit Exhaust Pro Shop. 

This full exhaust system is made with grade 304 stainless steel for long lasting performance and durability, CNC mandrel bent piping is used throughout the system to maximize exhaust flow efficiency and to eliminate any restriction due to smaller pipe diameter at bendings.  TIG/Argon welded with SuperCircuit craftsmenship and quality.

Cat Deleted 2.5" Downpipe for the 2.0TFSI with 177hp and 320Nm power plant.

Custom made Quad exhaust system to fit the add-on rear bodykit of the Audi A5 Coupé.

All of the above are customized at SuperCircuit Exhaust Pro Shop. For more information, please contact us at tel: 03 5632 2855 or join our SuperCircuit Exhaust Facebook for more exhaust news and updates. 

Mazda3 MPS Axle Back Exhaust Custom

We have custom made the axle back exhaust system for Mazda 3 MPS with grade 304 stainless steel mandrel bent piping and TIG/Argon welded by our master craftsmen.

Here is the photos:

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join the SuperCircuit Exhaust Facebook page for more updates and news.

Dyno Results of The New 2013 Perodua Myvi 1.5 M/T

Here at SuperCircuit Exhaust Pro Shop, we strive hard to provide you the best performance you can get from the exhaust system.

This time, it is the exhaust R&D for the new 2013 Perodua Myvi 1.5 Manual Transmission model.

Firstly, chosen the right exhaust extractor is very important. We found the 4-2-1 extractor is exceptionally suitable for the Manual Transmission Perodua Myvi 1.5.

The second stage is the right piping size for the centre section and rear muffler. We use grade 304 stainless steel CNC mandrel bent piping, match with the right sized centre resonator and an S-flow rear muffler for this Perodua Myvi 1.5.

After the exhaust is done, we brought the car for dyno test. 

With this set of exhaust system on the new Myvi 1.5 M/T, we recorded about 10ps of Power gain. The torque improvement is significant and almost evenly distributed along all the RPM range with maximum 8Nm of gain.

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: +6 03 5632 2855 or join our SuperCircuit Exhaust Facebook page for more exhaust news and updates. 

Full Stainless Steel Exhaust System for Perodua new Myvi 1.3 A/T

The performance exhaust system for the new 2013 Perodua Myvi 1.3 (auto transmission) by SuperStreet.

The SuperStreet 4-1 extractor is developed for the Perodua Myvi 1.3 auto transmission model. We recorded about 6.0hp on horse power and 3.0Nm of torque gains with this set of exhaust system.

SuperStreet stainless steel cat back exhaust system for the new 2013 Perodua Mvyi 1.3. The below exhaust system is shown with special made twin exhaust tips.

Perodua Mvyi 1.3 factory stock VS. SuperStreet stainless steel cat back exhaust system.

The SuperStreet exhaust system for the new 2013 Myvi 1.3 is made with grade 304 stainless steel, CNC mandrel bent piping & TIG-Argon welded for optimum performance and top notch quality. 

SuperStreet Sports Exhaust System is produced and distributed by H PERFORMANCE MOTORSPORTS. For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join the SuperCircuit Exhaust Facebook for more news and updates on the exhaust products.

VW Scirocco 2.0 Quad Exhaust Conversion

Here is how we convert the VW Scirocco exhaust to a quad exhaust tips setup. 

The VW Scirocco 2.0TSI stock factory exhaust in the backgound. The quad exhaust kit in front.

The template for cutting out the other side of the bumper, to fit the quad exhaust system.

Measure the right location from the template, draw the outline and cut the bumper off after that.

VW Scirocco 2.0TSI Quad Exhaust System conversion done!

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our SuperCircuit Exhaust Facebook for more exhaust updates and news.

Toyota 86 Cat Delete Pipe

SuperCircuit has produced the Cat Delete Test Pipe for Toyota 86 in 2.5" stainless steel mandrel bent piping.

The stock Toyota 86 exhaust pipe with catalytic converter.

The stock VS. SuperCircuit cat delete pipe. Note the cat delete pipe is still a pre-production one.

The production version. One piece mandrel bent piping formation, no joining, no flaw.

Stainless steel flange is used.

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our SuperCircuit Exhaust Facebook for more exhaust updates and news.

Mazda3 MPS Turbo Downpipe

SuperCircuit Exhaust Pro Shop has developed the stainless steel turbo donwpipe for the Mazda3 MPS (Mazda Performance Series).

Unmistakably Mazda3 MPS. 

The 2.3L MZR DISI TURBO with 260bhp & 380Nm performance. 

The SuperCircuit Cat Deleted Downpipe VS. the factory stock downpipe on the right.

The SuperCircuit downpipe installed. Everything fits nicely, just plug 'n play.

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or 'LIKE' us on SuperCircuit Exhaust Facebook.