Suzuki Swift 1.5 (ZC21S) Exhaust Headers

We have supplied and installed the SUPERCIRCUIT 4-2-1 tuned length headers to yet another 2nd generation Suzuki Swift 1.5 (ZC21S) shown below, to improve the exhaust flow efficiency hence better engine performance and output!

Pictured below, the 1.5L engine (code name M15A) of the 2nd generation Suzuki Swift (ZC21S) with the original exhaust headers removed.

This is how the exhaust ports look like after the factory stock original headers are removed from the M15A engine. Note: the original metal gasket shown in will be reused during the installation of SUPERCIRCUIT Headers.

The Suzuki Swift 1.5 (ZC21S) factory stock original headers (with catalytic converter) vs. the catless SUPERCIRCUIT 4-2-1 tuned length headers made of full 304 mandrel bent stainless steel (shown on the right in the below picture).

The length and size of the primary and secondary pipes are carefully calibrated for optimum exhaust flow efficiency and yet maintaining back pressure for a balanced low-end torque and high-end horsepower.

The SUPERCIRCUIT 4-2-1 tuned-length exhaust headers are bolted onto to the Suzuki Swift 1.5 (ZC21S)'s engine block. No cut or weld is required during the installation process.

The SUPERCIRCUIT 4-2-1 tuned-length exhaust headers are bolted onto to the Suzuki Swift 1.5 (ZC21S)'s engine block. No cut or weld is required during the installation process.

The SUPERCIRCUIT Suzuki Swift 1.5 (ZC21S) exhaust headers are compatible with the rest of the factory stock original cat-back exhaust system, so it is just bolted onto the original cat-back exhaust system as shown in the picture below, no further modification needed.

To purchase or for installation, please contact us or pay us a visit to our showroom in SS13 Subang Jaya Industrial Estate or the SUPERCIRCUIT authorized dealers nationwide.

For more information, please contact us at 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please 'LIKE' and follow us on the SuperCircuit Exhaust Facebook for more exhaust news and product updates.

Suzuki Swift 1.5 (ZC21S) Exhaust Headers/ Extractor

Here is yet another 2nd generation Suzuki Swift 1.5 (ZC21S) with the SUPERCIRCUIT 4-2-1 tuned length headers installed for better engine performance and output.

In the picture below is the 1.5L engine (code name M15A) of the 2nd generation Suzuki Swift (ZC21S) with the original exhaust headers removed.

The Suzuki Swift 1.5 (ZC21S) factory stock original headers vs. the SUPERCIRCUIT 4-2-1 tuned length headers made of full 304 mandrel bent stainless steel. The length and size of the primary and secondary pipes are carefully design and developed for optimum exhaust flow efficiency and yet maintaining back pressure for a balanced low-end torque and high-end horsepower.

Fully made of stainless steel and welded on laser-cut stainless steel flanges, the SUPERCIRCUIT 4-2-1 Headers promise no-fuss direct bolt-on application to the Suzuki Swift 1.5 (ZC21S)'s M15A engine block and is also fully compatible with the rest of the factory stock original cat-back exhaust system.

We ship the above headers worldwide, to purchase or for more information about the above SUPERCIRCUIT 4-2-1 tuned length exhaust headers/ extractor made for the 2nd gen. Suzuki Swift 1.5 (ZC21S) M15A engine, please visit us at SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please 'LIKE' and follow SuperCircuit Exhaust Facebook for more exhaust news and updates.

Suzuki Swift 1.5 (ZC21S) Extractor & Catback Exhaust Custom

As the largest exhaust headers and downpipe manufacturer in the region, SuperCircuit Exhaust Pro Shop always stocks up the supplies for your tuning and modding needs. There are also exceptions, when customers do not find what they wanted off the shelves, we can always custom made it.

Here is the 2nd generation Suzuki Swift 1.5 (ZC21S) with the ready made SUPERCIRCUIT 4-2-1 Headers and custom made catback exhaust sytem by the master craftsmen here at the SuperCircuit Exhaust Pro Shop.

The SUPERCIRCUIT 4-2-1 Headers/ Extractor made for the 2nd gen. Suzuki Swift 1.5 (ZC21S) vs. the factory stock original one.

The SUPERCIRCUIT headers are made with grade 304 mandrel bent stainless steel and are fully TIG/Argon welded on CNC machined flanges to ensure flawless fitment and optimum performance.

The SUPERCIRCUIT Suzuki Swift 1.5 (ZC21S) 4-2-1 Headers/ Extractor is designed for direct bolt-on application and it is available off-the-shelves here at the showroom.

The Suzuki Swift 1.5 (ZC21S) custom made catback exhaust system is also made with grade 304 mandrel bent stainless steel and fully TIG/Argon welded with top notched craftsmanship.

The extra canister at the rear muffler gives bassy exhaust note and unique exhaust sound at higher end, and minimize droning while cruising.

The above axle-back exhaust setup is made to order according to the customer's requirement and liking. The car has to be at the SuperCircuit Exhaust Pro Shop's installation bays for such exhaust customization job.

For more information, please visit us at SuperCircuit exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please 'LIKE' and follow SuperCircuit Exhaust Facebook for more exhaust news and updates.

Suzuki Swift 1.5 (ZC21S) Headers

Come visit us at the SuperCircuit Exhaust Pro Shop and select from the largest collection of exhaust headers in the country, with models ranging from JDM, European to the local marques.

Yet another 2nd generation Suzuki Swift 1.5L (ZC21S) installed the SUPERCIRCUIT 4-2-1 Exhaust Headers in a week:

The 2nd generation Suzuki Swift with M15A 1.5L in-line 4 cylinder engine shown below.

Look closely, you will find out the factory stock headers has been swapped with the SUPERCIRCUIT one, for better overall performance and better low-end torque.

The SUPERCIRCUIT catless headers developed for the Suzuki Swift 1.5 (ZC21S) is fully made of 304 stainless steel from flanges to mandrel bent pipes, then is hand welded by the master craftsman here at the SuperCircuit Exhaust Pro Shop and ready for direct bolt-on.

The SUPERCIRCUIT Suzuki Swift 1.5 Headers are designed to bolt-on straight and are compatible with the rest of the factory stock exhaust system, no cut or weld is required for installation.

To purchase or for more information about the above top quality and highly craftsmanship headers made for the 2nd generation Suzuki Swift 1.5 (ZC21S), please contact SuperCircuit Exhaust Pro Shop, Subang Jaya Industrial Estate. Tel: +6 03 5632 2855 or or Send Us A Message using the form on the right of this page.

Please join SuperCircuit Exhaust Facebook for more exhaust news and updates.

Suzuki Swift 1.5 (ZC21S) Headers

It is fair to say that SuperCircuit Exhaust Pro Shop has the largest collection of exhaust headers in the country, with models ranging from JDM, European to the local marques.

Here are the photos of the SUPERCIRCUIT 4-2-1 Exhaust Headers developed for the 2nd generation Suzuki Swift 1.5L (ZC21S) below:

The factory stock exhaust headers/ extractor is removed of the 2nd generation Suzuki Swift with M15A 1.5L in-line 4 cylinder engine below.

The SUPERCIRCUIT 4-2-1 Exhaust Headers is specially developed to produce balanced low-end torque and high-end horsepower for the Suzuki Swift 1.5 M15A engine.

It is fully made with grade 304 stainless steel mandrel bent pipes and fully TIG/Argon welded on CNC machined flanges by the master craftsmen here at SuperCircuit Exhaust Pro Shop and ready for plug 'n play application.

The SUPERCIRCUIT Suzuki Swift 1.5 Headers are designed to bolt-on straight and are compatible with the rest of the factory stock exhaust system, no cut or weld is required for installation.

To purchase or for more information about the above top quality and highly craftsmanship headers made for the 2nd generation Suzuki Swift 1.5 (ZC21S), please contact SuperCircuit Exhaust Pro Shop, Subang Jaya Industrial Estate. Tel: +6 03 5632 2855 or or Send Us A Message using the form on the right of this page.

Please join SuperCircuit Exhaust Facebook for more exhaust news and updates.

Suzuki Swift 1.5 (ZC21) Headers

The SUPERCIRCUIT 4-2-1 Headers/ Extractor made for the 2nd generation Suzuki Swift 1.5L ZC21 (2004-2010) is installed to the car below.

The SUPERCIRCUIT Suzuki Swift 1.5 extractor is made of grade 304 stainless steel CNC mandrel bent pipes and fully TIG/Argon welded by the master craftsmen here at SuperCircuit Exhaust Pro Shop and installed in-house to ensure perfect fit.

The catless SUPERCIRCUIT 4-2-1 Suzuki Swift 1.5 Extractor has larger and longer primary pipes compared to the factory stock extractor (BELOW RIGHT). With the 4-2-1 piping formation, higher torque and horsepower can be extracted. 

The flanges of the SUPERCIRCUIT Suzuki Swift 1.5 extractor is made with high precision laser cut stainless steel piece and fully TIG/Argon welded.

The EGR (Exhaust Gas Recirculation) pipe of the Suzuki Swift 1.5 (ZC21) is not to be omitted, so not check engine light issue after the extractor is installed.

To purchase or for more information about the SUPERCIRCUIT 4-2-1 Headers/ Extractor made for the Suzuki Swift 1.5 (ZC21) above, please visit us at SuperCircuit exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please join SuperCircuit Exhaust Facebook for more exhaust news and updates.