VW Golf Mk7 1.4 TSI Twin Exhaust Conversion

Here is an example of a one-off twin tailpipes conversion for the Volkswagen Golf Mk7 1.4 TSI custom made at SUPERCIRCUIT Exhaust Pro Shop.

We, at SUPERCIRCUIT Exhaust Pro Shop, do not only supply the ready-made exhaust systems off the shelves, we also provide exhaust customization service to customer's specific requirement and specifications.

This VW Golf 7 1.4 TSI cat-back exhaust system uses two stainless steel straight-flow muffler box setup and two piece of carbon exhaust tips, then fully TIG/Argon welded by the master craftsmen here at the SUPERCIRCUIT Exhaust Pro Shop.

The catback exhaust system are made of true CNC mandrel bent 304 stainless steel pipes and fully TIG/Argon welded to ensure the whole exhaust setup is not only sounds good, it has to be durable and rust proof too! 

For more information about any exhaust customization job, please visit us at SuperCircuit exhaust Pro Shop, SS13 Subang Jaya Industrial Estate Tel: 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please join SuperCircuit Exhaust Facebook for more exhaust news and updates.

VW Golf Mk7 1.4TSI Quad Exhaust Conversion

Here at SUPERCIRCUIT Exhaust Pro Shop, we do not only supply the ready-made exhaust system off the shelves, we also provide exhaust customization service to customer's specific requirement and specifications.

Here is an example of a one-off quad tailpipes conversion for the Volkswagen Golf Mk7 1.4 TSI custom made at the SUPERCIRCUIT Exhaust Pro Shop.

This VW Golf 7 1.4 TSI axle-back exhaust system uses a stainless steel transverse muffler box setup and four piece of exhaust tips, then fully TIG/Argon welded by the master craftsmen here at the SUPERCIRCUIT Exhaust Pro Shop.

For more information about any exhaust customization job, please visit us at SuperCircuit exhaust Pro Shop, SS13 Subang Jaya Industrial Estate Tel: 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please join SuperCircuit Exhaust Facebook for more exhaust news and updates.

Ford Ranger 3.2D Downpipe

Another Ford Ranger 3.2D T6 installed with the SUPERCIRCUIT downpipe.

The SUPERCIRCUIT catless downpipe is made of 2.5" stainless steel CNC mandrel bent pipes and fully TIG/Argon welded. It is specially made for the Ford Ranger 3.2D T6 Duratorq TDCi ("PUMA" P5AT) in-line 5 cylinder engine and is with dyno proven performance.

The factory stock metal gasket is to be reused for the installation of the SUPERCIRCUIT Downpipe.

The Ford Ranger 3.2D turbo outlet view from the underneath.

The SUPERCIRCUIT downpipe is designed to bolt-on straight, it is compatible with the factory stock turbo of the Ford Ranger 3.2D at the front and match exactly to the stock catback exhaust system at the back. No modification is required during the installation.

SUPERCIRCUIT Turbo Downpipe installed to the Ford Ranger 3.2D T6.

You are the rest assured with performance with this SUPERCIRCUIT downpipe. We recorded significant gains, especially at the low end.

For more information about the SuperCircuit downpipe made for the Ford Ranger 3.2D Duratorq Turbo Diesel, please visit us at SuperCircuit exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please join SuperCircuit Exhaust Facebook for more exhaust news and updates.

Suzuki Swift Sport 1.6 ZC32S Headers/ Extractor

We have developed a set of 4-2-1 Headers/ Exhaust Extractor for the 3rd generation Suzuki Swift Sport 1.6 (ZC32S) and installed to it. Here are the photos:

The M16A in-line 4 cylinder power plant on the 3rd generation Suzuki Swift Sport. 

The exhaust outlets of the M16A engine shown below, after the factory stock headers is removed. 

The Suzuki Swift Sport factory stock headers with a big catalytic converter vs. the SUPERCIRCUIT catless larger flow headers (SEE BELOW).

The O.D. of the SUPERCIRCUIT headers are 1-3/4" - 2.0" - 2.5" which gives higher exhaust flow efficiency and a lot less restrictive, hence better performance.

Made of grade 304 stainless steel mandrel bent pipes, even the flanges are done in grade 304 stainless steel, then full TIG/Argon welded by the master craftsmen here at SUPERCIRCUIT Exhaust Pro Shop.

The factory stock metal gasket is to be reutilized during the installation of the SUPERCIRCUIT Headers, so great care must be taken while taking off the stock headers.

SUPERCIRCUIT Headers is designed to 100% bolt-on, no further modification needed during the installation.

To purchase or for more information about the SUPERCIRCUIT Headers/ Extractor made for the 3rd generation Suzuki Swift Sport 1.6 (ZC32S), please visit us at SuperCircuit exhaust Pro Shop, SS13 Subang Jaya Industrial Estate Tel: 03 5632 2855 or Send Us A Message using the form on the right of this page.

Please join SuperCircuit Exhaust Facebook for more exhaust news and updates.